D-SUB connector with coaxial cable

Coaxial cable with D-Sub connector, DSub 9 – DSub 15 – DSub 25 – DSub 37

A cable whip is a type of cable adapter consisting of a multi-pin connector from which several cables, each with a connector, emerge. We often offer these adapters in combination with our breakout boxes.

Several participants are fed in via the connectors of the box and are routed together to one connector, e.g. D-Sub. With this adapter, all signals are routed via the cable whip to the corresponding end devices, e.g. a measuring device.

Such an adapter can consist of 2-10 individual cables, which has the advantage of requiring less space.

The D-Sub is available as standard in the versions DB9, DB15, DB25 and DB37.
The cable length and the choice of connectors depends entirely on your application and is manufactured from one piece exactly to your requirements.

Definition: 9-pin socket (female) = BU female, 9-pin plug (male) = ST pin (male)

Coaxial cable with D-Sub connector

We create a cable whip or cable distribution from D-Sub connector to coaxial cable with the appropriate connector of your choice. Examples can be found below.
As a rule, the signal distribution at the D-Sub connector or at the D-Sub socket is realised via a suitable printed circuit board. This guarantees consistent quality and optimises the spacing of the connection to a

Pin assignment 9pol. D-Sub socket and 9-pin D-Sub plug D-Sub plug

The following table gives you an overview of the pin assignment and the allocation of the possible connections.
The matching PCB is equipped with as many connections as possible so that omitting connections is not a problem.
The PCB solution is optimised for maximum spacing between the individual contacts and guarantees consistent quality. The labelling of the printed circuit board facilitates assignment.
Our kit is equipped with high-quality connectors and housings. A suitable shrink sleeve with internal adhesive for the cable outlet in the housing is always included.

---