0.6/2.8AF FRNC vs. arnoflex 0.6/2.8
arnotec’s own brand of coaxial cable
We created our own arnoflex brand in order to offer our customers excellent quality at favourable prices. We are supported in this endeavour by a European cable manufacturer with decades of experience. Compared to well-known brand cables, our arnoflex cables are a low-cost alternative with equivalent and in some cases better mechanical and electrical properties.
The halogen-free arnoflex 0.6/2.8 can be ordered both by the metre and in prefabricated form from our online shop.
The table below compares the 0.6/2.8AF FRNC and arnoflex 0.6/2.8 cables. It should be emphasised here that the arnoflex 0.6/2.8 has a smaller bending radius and is suitable for lower temperatures.
Comparison of technical data
Electrical properties
| Article number | 050281 | 050179 | |
| Shield type | double shielded | double shielded | |
| Impedance | 75 Ohm | 75 Ohm | |
| Frequency | max. 3 GHz | max. 5 GHz | |
| Cable attenuation | 0.20 db (400 MHz) 0.33 db (1 GHz) 0.48 db (2 GHz) | 0.21 db (400 MHz) 0.33 db (1 GHz) 0.48 db (2 GHz) |
Mechanical properties
| Cable shield | Ø 4.50 mm | Ø 4.50 mm | |
| – Material | FRNC/LSNH | FRNC/LSNH | |
| Shield 2 | Tinned copper braiding | Tinned copper braiding | |
| Shield 1 | Aluminium foil | Aluminium foil | |
| Dielectric | Ø 2.80 mm | Ø 2.80 mm | |
| – Material | PE sm | PE sm | |
| Inner conductor | 0.60 mm | 0.60 mm | |
| – Material | solid copper | solid copper | |
| Temperature | -30°C min. / +70°C max. | -15°C min. / +70°C max. | |
| Bending radius | 22.5 mm (one-off) 45 mm (repeat) | 25 mm (one-off) 45 mm (repeat) | |
| Halogen-free | yes | yes |
Further Information
| Datasheet | PDF (152KB) | PDF (125KB) | |
| Cable configurator | pre-assembled | pre-assembled |
Suitable connectors for arnoflex 0.6/2.8
F plug | BNC jack | BNC bulkhead jack | BNC UHD plug | BNC plug | BNC Pro plug